Sunday, December 18, 2016

Gift Wrapping for a Neat and Tidy Christmas Morning!!

Every year....I promise myself to get all of the holiday shopping done early!
Every year....I totally fail at actually doing it!
I know I am not alone....
otherwise why would a google search for last minute gifts get 18,000,000 hits?
Source



Chances are....you will also be doing some last minute wrapping in the next couple of days!
Chances are....you will spend quite a bit of time doing that wrapping. 
Chances are....on Christmas Eve or Morning your living room will look like this in pretty short order.
I want to show you a clever trick to cut down on the mess of opening gifts.
It is really simple.
Wrap the top and bottom of the boxes with as many gifts as you can,
 Here is a step-by-step if you need it.


DISCLAIMER




The wrapping paper in this tutorial is really light weight!
I wanted to get this posted and don't have time to run out and buy better stuff.
You will see all the flaws....but the process stays the same.
MORAL: Buy good paper!





 This is a nice sturdy box with a lid that only comes down part way.  Those boxes that reams of paper come in are great for bigger things.
BUT...you can do this with the fold up shirt boxes you get from the department store too!


Step 1: Lay the lid on the paper and cut the paper. It should cover the long sides with about an inch extra to fold over the top. Leave the short ends long enough to fold up and over the sides with a slightly longer overhang, about 1-1/2 to 2 inches.

 







 Step 2: Fold the long sides up and over the lid. Use a piece of tape to attach the paper to the inside edge of the lid as pictured and repeat on the other side (just one piece now to hold in place).

Step 3: Take the end sections and fold just like wrapping a regular box: Bring the edges in and fold as pictured. then make creases and fold the edges that stick up over and inside the box as shown.

 
Step 4: Tape the first folds to the inside lip of the lid. Where the side and end papers meet in the corners is the only tricky part, but just tuck and fold until flattened and then place a piece of tape to hold. Continue to fold and wrap the end just like a regular box, but take extra time folding and creasing so it will lay flat.

Step 5: When finished folding the end, wrap it over the lid edge and secure it with tape.
Step 6: Repeat with the other end.





Step 7: Repeat all the steps with the bottom of the box. OOPS on this example, I didn't make it long enough to tuck inside....but the top will cover it.

















I use that wonderful wired ribbon that comes in big 50 yd. spools.


Simply make a crossed wrap and tie a simple bow.









The packages look so nice under the tree....

And when it is time to open gifts......

A pull on the bow.....

A lift of the lid....

NO MUSS

NO FUSS

Then when everyone is ready to head home....the covers go back on the boxes and all the mess walks out the door instead of needing to go into the trash!


Simply Genius!












The thermometer is reading -23 degrees and we have a bunch of people coming for a Holiday Open House this afternoon...HMMMMMM!

Have A Wonderful Day!

Link Parties
Share It One More Time







No comments:

Related Posts Plugin for WordPress, Blogger...